QT-612

Dual SIM GSM/GPRS Remote Monitoring and Control Terminal

Analog Inputs for analog/sensor data monitoring
Digital Inputs for remote monitoring
Digital outputs for remote controls
Programmable automation logic for digital outputs.
RS232 and RS485 ports
Dual SIM for redundant communication(Optional)
Support HTTP,MQTT or FTP protocols for data communication
Customizable firmware.
Built in RTC .
Low Cost

GSM 850 / 900 / 1800 / 1900MHz GPRS Class 10
Multi-slot class 10 (4 Down; 2 Up; max.5) Max BR Download 85.6 Kbps Coding Scheme CS1-CS4
Ultra Low Consumption
Operating Temperature: -40 to +85°C
Sensitivity: -109dBm (850 / 900MHz), -108dBm (1800 / 1900MHz)
12 Analog Inputs 20mA or 0-5/10 volts
12 Digital Inputs
8 Digital Outputs
1 RS232 DB9 Port
1 RS485 Port MODBUS Data Aquisition
12-30V DC input power
Sleep mode for low power consumption

Customizable firmware based on project requirements
Communication of data to server on specific events or on configured intervals
Dual SIM Card option and switching of SIM cards in case of communication failures
Supports protocols like HTTP, MQTT or FTP for data communication to the server
Storing and forwarding of data in case of communication failures
Programmable automation of DO operations by giving simple conditions for time, week day, DI status etc…
Operation of Digital outputs via SMS commands or commands from server
Generation of events on change of DI or DO and sending alerts to Server or SMS alerts to configured group of numbers.
Provision for implementing protocols like MODBUS or any other proprietary protocol and acquire data from one or more devices connected to RS232 or RS485 ports
Facility to store mobile numbers in different groups for authorization and SMS alerts
Configuration of parameters via serial port or remotely by SMS or from the Server
Facility to go on low power mode when there is no communication and automatic wakeup on incoming communication, serial events or DI events
Watchdog timer
Over the air firmware update

Remote monitoring application
Automation and Remote operation of pumps, valves etc
Data acquisition from remote devices on Modbus protocols
Automatic Meter reading

Site Search

QT606 : GSM/GPRS Terminal

GSM/GPRS Intelligent Retmote Monitoring Terminal with RS232 and RS485 ports, 4 Analog Inputs,3 Digital Inputs,2 Digital Outputs and two pulse counters. Ideal for Remote Monitoring and MODBUS data aquisition. Supports MQTT,HTTP and FTP Protocols.

QD1000 : Data Logger with GSM/GPRS, Ethernet and GPS

Fullfledged Data Logger with 8 high precision analog inputs, 8 digital Inputs and 8 Digital Outputs. Ethernet for LAN Connectivity. SD Card and USB ports.RS485 , RS232 and optional SDI and HART ports.

QT602 : Low Cost GSM/GPRS Terminal

A simple GSM/GPRS Terminal with RS232 and RS485 ports for remote Data acquisition. Can capture data from connected devices on standard protocols like MODBUS or proprietary protocols and communicate it to the server on HTTP, MQTT or FTP protocols.

Remote Monitoring and Control

Qinntech Terminals with Analog and Digital Input ports and also Digital Outputs are ideal choice for Remote Monitoring and Control applications

Analog Input Monitoring

Qinntech products offer various solutions for monitoring analog inputs from remote sensors and other devices. The wide available options and configurability makes these devices suitable for most of the requirements.

RELATED APPLICATIONS

Remote Automation

Qinntech offers devices that can take automation as well as communication of data to the server with high efficiency and less cost.