QT-606

GSM/GPRS based Remote Terminal Unit.

Ideal for Flow meter applications

Analog inputs for instantaneous monitoring (4-20mA current or 0-10v )
Pulse counters
Digital Inputs for remote monitoring
Digital outputs for remote controls
MODBUS Data Aquisision from MDOBUS RTU Clients
RS232 and RS485 ports for data acquisition
Supports HTTP,MQTT and FTP protocols for data communication
Customizable firmware
Built in RTC
High reliability and Low cost

GSM 850/900/1800/1900MHz GPRS Class 10
Multi-slot class 10 (4 Down; 2 Up; max.5) Max BR Download 85.6 Kbps Coding Scheme CS1-CS4
2 Pulse inputs
5 GPIOs configurable as Digital inputs or Digital Outputs
1 RS232 DB9 Port
1 RS485 Port for MODBUS Data Aquisition
12-30V DC input power
Sleep mode for low power consumption

Customizable firmware based on project requirements
Continuous monitoring of pulse inputs and maintaining counters. Ideal for pulse based flow meter with forward and reverse flow pulses)
Continuous monitoring of analog inputs. Ideal for flow meter with 4-20mA or voltage outputs for flow rates.
Poll MODBUS RTU clients and decode data.
Server Communication using protocols like HTTP,MQTT or FTP
Communication of data to server based on specific events or on configured intervals
Storing and forwarding of data in case of communication failures
Programmable automation of DO operations by giving simple conditions for time, week day, DI status etc…
Operation of Digital output via SMS commands or commands from server
Generation of events on change of DI or DO and generation alerts to Server or SMS alerts to configured group of numbers.
Facility to store mobile numbers in different groups for authorization and SMS alerts
Configuration of parameters via serial port or remotely by SMS or from the Server
Facility to go on low power mode when there is no communication and automatic wakeup on incoming communication, serial events or DI events.
Watchdog timer
Over the air updation of firmware

Data Acquisition and communication of various Flow meters
Remote monitoring application
Automation and Remote operation of pumps, valves etc
Data acquisition from remote devices on MODBUS protocol

Site Search

QT602 : Low Cost GSM/GPRS Terminal

A simple GSM/GPRS Terminal with RS232 and RS485 ports for remote Data acquisition. Can capture data from connected devices on standard protocols like MODBUS or proprietary protocols and communicate it to the server on HTTP, MQTT or FTP protocols.

QT612 : GSM/GPRS Remote Monitoring Terminal

Dual SIM GSM/GPRS Terminal with 12 Digital Inputs, 8 Digital Outputs and 12 Analog Inputs. Ideal for Remote Monitoring, Control and Automation.

QD1000 : Data Logger with GSM/GPRS, Ethernet and GPS

Fullfledged Data Logger with 8 high precision analog inputs, 8 digital Inputs and 8 Digital Outputs. Ethernet for LAN Connectivity. SD Card and USB ports.RS485 , RS232 and optional SDI and HART ports.

Remote Monitoring and Control

Qinntech Terminals with Analog and Digital Input ports and also Digital Outputs are ideal choice for Remote Monitoring and Control applications

Analog Input Monitoring

Qinntech products offer various solutions for monitoring analog inputs from remote sensors and other devices. The wide available options and configurability makes these devices suitable for most of the requirements.

RELATED APPLICATIONS

Remote Automation

Qinntech offers devices that can take automation as well as communication of data to the server with high efficiency and less cost.