QT-602

GSM/GPRS Remote Monitoring Terminal

Data Aquisition from MODBUS RTU Clients
Serial Data monitoring and communication to the Server
RS232 and RS485 ports for data acquisition
Two Digital Inputs for Monitoring and event based communication of data to the server.
Support HTTP,MQTT and FTP protocols for data communication
Customizable firmware.
Built in RTC .
Low Cost

GSM 850 / 900 / 1800 / 1900MHz GPRS Class 10
Multi-slot class 10 (4 Down; 2 Up; max.5) Max BR Download 85.6 Kbps Coding Scheme CS1-CS4
Operating Temperature: -40 to +85°C
Sensitivity: -109dBm (850 / 900MHz), -108dBm (1800 / 1900MHz)
1 RS232 DB9 Port
1 RS485 Port
2 Digital Inputs
12-30V DC input power
Sleep mode for low power consumption

Customizable firmware based on project requirements
Acquire data from one or more MODBUS RTU Clients
Provision to cofngiure MODBUS register mapping of each client and decode the data from these clients
Communication of data to server on specific events or on configured intervals
Communication data to server on HTTP,MQTT or FTP Protocols
Storing and forwarding of data in case of communication failures
Facility to store mobile numbers in different groups for authorization and SMS alerts
Configuration of parameters via serial port or remotely by SMS or from the Server
Facility to go on low power mode when there is no communication and automatic wakeup on incoming communication, serial events or DI events
Watchdog timer
Over the air firmware update

Remote Data Acquisition for MODBUS Client devices
Serial to HTTP/MQTT commmunication over GPRS
Automatic Meter reading
Remote Water Meter reading

Site Search

QT-601 Low Cost GSM/GPRS Terminal

A simple GSM/GPRS Terminal with RS232 and RS485 ports for remote Data acquisition. Can capture data from connected devices on standard protocols like MODBUS or proprietary protocols and communicate it to the server on HTTP, TCP, FTP or MQTT protocols.

QT-612 GSM/GPRS Remote Monitoring Terminal

Dual SIM GSM/GPRS Terminal with 12 Digital Inputs, Digital Outputs and Analog Inputs. Ideal for Remote Monitoring, Control and Automation

QT-606-GSM/GPRS Terminal

GSM/GPRS Terminal with 2 Pulse inputs, 4 Analog Inputs and 6 Digital Inputs/Outputs, Ideal for Flow meter applications.

Remote Monitoring and Control

Qinntech Terminals with Analog and Digital Input ports and also Digital Outputs are ideal choice for Remote Monitoring and Control application

Modbus Data Acquisition

Qinntech GSM/GPRS terminals can act as a MODBUS master and get data from one or more MODBUS clients connected to its RS232 or RS485 port.

RELATED APPLICATIONS

Digital Input monitoring

The digital inputs of Qinntech Terminals can monitor the status of your remote assets and communicate to the server via GPRS or directly to your mobile by way of SMS messages on change of status.

Serial Data Capture and Server Communication

There are many devices that can communicate data through its serial ports. Our devices are capable of capturing such data and communicate to a server on protocols like TCP,HTTP FTP etc